Ryobi CS30 RY30020A Manuale Utente

Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly car

Page 10INSTALLING THE POWER HEAD TO THE ATTACHMENTSee Figure 2.WARNING:Never install or adjust any attachment while power head is running. Failur

Page 11ATTACHING THE FRONT HANDLE - CS30 AND SS30See Figure 4.n Remove the front handle, bolt, flat washer, lock washer, and wing nut from the Operat

Page 12ATTACHING THE GRASS DEFLECTOR WARNING:The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failur

Page 13ATTACHING THE SHOULDER HARNESS - BC30See Figure 9.n Connect the latch on the shoulder harness to the strap hanger.n Adjust the strap to a

Page 14ASSEMBLYREMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEADSee Figures 10 - 13.n Align the slot in the flanged washer with the slo

Page 15FUELING AND REFUELING THE TRIMMERFUEL MIXTUREThis product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil. Pre-

Page 16WARNING:Always hold the string trimmer away from the body keep-ing clearance between the body and the product. Any contact with the hou

Page 17n Inspect and clear the area of any hidden objects such as glass, rocks, concrete, fencing, wire, wood, metal, etc.n Never use blades near sid

Page 18OPERATIONSTARTING AND STOPPINGSee Figures 21 - 23.TO START A COLD ENGINE:DO NOT squeeze the throttle trigger until the engine starts and runs.n

Page 19MAINTENANCEFig. 24SPOOLRETAINERFig. 25SPRINGSLOTSSTRING HEADEYELETSSHAFTn Remove the empty spool from the string head. Keep the spring attache

Page 2n Introduction ...

Page 20To install the spool retainer:n Turn the spool retainer clockwise for model CS30. Turn the spool retainer counterclockwise for models SS30 and

Page 21MAINTENANCECLEANING THE EXHAUST PORT AND MUFFLERNOTE: Depending on the type of fuel used, the type and amount of oil used, and/or your oper

Page 22PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CON

Page 23PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBL

Page 24WARRANTYLIMITED WARRANTY STATEMENTRyobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies,

Page 25RYOBI TECHNOLOGIES, INC. LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENGINESThe U.S. Environme

983000-6862-05RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Post Office Box 1207, Anderson, SC 29622Phone 1-800-860-4050www.ryobi

Page 3GENERAL SAFETY RULESWARNING:Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock,

Page 4SPECIFIC SAFETY RULESSPECIFIC SAFETY RULES FOR TRIMMER USEn Replace string head if cracked, chipped, or damaged in any way. Be sure

Page 5SYMBOLS50' 15m50' 15mSome of the following symbols may be used on this tool. Please study them and learn their meaning for safe operat

Page 6SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service

Page 7FEATURESPRODUCT SPECIFICATIONSWeight - (without fuel) CS30 (RY30020A) ...

Page 8FEATURESFig. 1bFig. 1cTHROTTLE TRIGGER FRONT HANDLECOUPLERDRIVE SHAFT HOUSINGSTRING HEADSTRAIGHT SHAFT GRASS DEFLECTORTHROTTLE TRIGGER“J” HANDLE

Page 9ASSEMBLYFEATURESKNOW YOUR STRING TRIMMERSee Figures 1a - 1c.Before attempting to use this product, familiarize yourself with all operating featu